Technical Tips > Pre 84

axles and all things pre 84

(1/2) > >>

MR 69ER:
Does anyone have any info or know of a link to a how to site for the replacement of rear wheel bearings on a 69 model. I know of a write up that was done by corvette fever a few years ago but I cant seem to find it any where. I'm calling out for you Brutus as I am hoping that you will have some info on this. I already have all the replacement gear but I just need to know how to do the job. By the way it was myself & Andy that bumped into your son out at Rosehill racecourse last Friday how did he do on the dyno? and nice looking SSS. The guys running the dyno there were my mates from down the coast they really seem to be getting on in the industry. Hope you can help me out.

Cheers
Steve :20:20:20

booboo:
try this www.corvettefaq.com/ has links for all and any info on pre 84 corvettes.
Awesome site!

Good luck,

cheers
booboo.
(my first post, hopefully)

Brutus:
I'll see what I can chase up for you Steve. Scott told me some guys mentioned to him that they knew me, but being a typical lad, he couldn't tell me anything worthwhile that made you identifiable in the least.
He made 216 RWHP from his 2 ltr on his first attempt on the dyno, but didn't go back on the Sunday.

Brutus:
Steve...These articles aren't very bearing specific, but it's a start.
http://www.corvettemagazine.com/2002/march/trailingarms/ta-1.asp
http://www.corvettemagazine.com/2002/april/trailingarm2/arm2-1.ASP

Bob

Brutus:
Here's a pretty rough one from Van Steel.
http://www.vansteel.com/index.cfm?fuseaction=bearingremoval

Bob

Navigation

[0] Message Index

[#] Next page