Has any one had any luck striping C3 seat tracks to overhaul them
There must be a way to pull them apart
BFit
Hi Bob,
I had a spare one that I stripped to see what was involved. The rivets holding the mounting brackets on needed to be drilled out so the two sides could come apart. From memory there was a roller and ball bearing that fell out when I did get them apart.
It turned out to be more of a pain in the a-se then what it was worth.
I ended up refurbing my originals the best I could without stripping them. Cleanup, paint and re-lube.
One thing to note if you replace the tracks, 72 onwards use about 1"+ longer tracks then previous years and the rear mounting bracket will not line up.
