« previous next »
Pages: [1]   Go Down

Author Topic: Wheel alignment issues  (Read 6430 times)

0 Members and 2 Guests are viewing this topic.

Offline anychevy

  • Four Barrel
  • ***
  • Posts: 202
  • Location: Gold Coast
  • Car: 66 convertible
Wheel alignment issues
« on: October 05, 2012, 11:12:19 AM »
Just replaced the front lower control arm bushes and ball joints and found I can only get ~ 1.5○ + caster without going into + camber and there's no room for more shims.
I read on corvette forum alot of guys "slot" the shaft for fore and aft movement and there is also a MOOG kit for added camber which also allows for more shims.
Has anyone tried either of these, or have another solution ?
I've got very little wheel return out of a corner now.
Logged

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Wheel alignment issues
« Reply #1 on: October 05, 2012, 03:30:42 PM »
Mate 
72vet will see your post
 he has or had a spare set of offset
top brackets the allows for more adjustment
you mate consider  a spreader bar across the top of your spring towers
Bfit
Logged
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline anychevy

  • Four Barrel
  • ***
  • Posts: 202
  • Location: Gold Coast
  • Car: 66 convertible
Re: Wheel alignment issues
« Reply #2 on: October 05, 2012, 03:52:02 PM »
I think this is what I need, but I'm not sure if this is the MOOG version or Van Steel's ?

 


Logged

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Wheel alignment issues
« Reply #3 on: October 05, 2012, 04:04:30 PM »
Quote from: anychevy on October 05, 2012, 03:52:02 PM
I think this is what I need, but I'm not sure if this is the MOOG version or Van Steel's ?

 




I think you will find this is the still of bracket  72Vet has ( or had a few months back left of from his rebuild )
Logged
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline anychevy

  • Four Barrel
  • ***
  • Posts: 202
  • Location: Gold Coast
  • Car: 66 convertible
Re: Wheel alignment issues
« Reply #4 on: October 05, 2012, 04:13:01 PM »
OK, great, I hope to hear from him.
Thanks
Dave
Logged

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Wheel alignment issues
« Reply #5 on: October 05, 2012, 04:26:54 PM »
Anychevy
PM message  re contact info
Bfit
Logged
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline anychevy

  • Four Barrel
  • ***
  • Posts: 202
  • Location: Gold Coast
  • Car: 66 convertible
Re: Wheel alignment issues
« Reply #6 on: October 05, 2012, 05:51:52 PM »
Set of MOOG offset shafts and bushes comming.
Hopefully that'll get it to align o.k.
Cheers
Dave
Logged
Pages: [1]   Go Up
« previous next »