Author Topic: central locking C3  (Read 6578 times)

0 Members and 1 Guest are viewing this topic.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
central locking C3
« on: July 13, 2012, 12:44:58 PM »
I searched the forum for info in fitting central locking  to pre 78 C3
 Here is  my version  one, of how to do it  
I would like to fit two actuators to each door have some back up and do away with the key entry

One actuator is mounted on the cover  to access the door internals
the other will possibly be inside the door
Still working that one out.
I could go with coping the later 78 up idea for electric locking.

mod to actuation rod
 

assembled unit






Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
central locking C3
« Reply #1 on: July 13, 2012, 01:29:56 PM »
Yup!  Did this on my '77.  Was pretty easy actually.  :shades:

Works even better when everything is lubed up.  :rolleyes:

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 700
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
central locking C3
« Reply #2 on: July 13, 2012, 09:19:14 PM »
Early  C3 is easy as there is a large void in back of arm rest to surface mount actuator. My 78 had holes in the door from factory which lined up with Jaycar actuators. Is a bit harder to connect to door linkage as is on inside of door

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
central locking C3
« Reply #3 on: July 13, 2012, 10:07:51 PM »
I have a photo of a 79 door showing the rivets retaining the vette electric lock actuator inside the door .
I will mount an acturer inside the door and cut a hole for  the acturer rod to allow it to attach to the vertical lock rod of the earlier C3
I was hoping some else had already don't that .
Two actuators give back up for failure protection
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline mick

  • Tri Powered
  • ****
  • Posts: 489
central locking C3
« Reply #4 on: July 14, 2012, 12:27:23 PM »
I did the same as well with an immobilisor/alarm/central locking kit.

You've Done Well !!!!!

:hammer:

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
central locking C3
« Reply #5 on: July 25, 2012, 11:05:55 AM »
Final instal looks like this



control module mounting

hardest part of job  was get the cabling in to the doors
Bfit

I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill