Author Topic: 1st -2nd & 3rd-4th selector input shaft selectors (Read 6302 times)

Jethro · « **on:** April 28, 2012, 10:46:48 AM »

would anyone be able to help me get these two parts off my 1969 muncie 4 speed they are what I believe you refer to as 1st -2nd and 3rd-4th input selector shafts? The actual selectors arm bolt onto them and both of these shafts are badly worn on the flats ? Sorry about the bad pic's I got them sent to me by gear box mechanic...
Tks Jethro

bfit · « **Reply #1 on:** April 28, 2012, 04:43:06 PM »

Jethro
first the engine now the gear box

you know what they say about opening a can of worm
Bfit

Jethro · « **Reply #2 on:** April 28, 2012, 10:37:20 PM »

Quote from: Bfit link=topic=9179.msg1045942623#msg1045942623

Jethro
first the engine now the gear box

you know what they say about opening a can of worm
Bfit

:bang::bang::bang::bang::bang::bang::bang:

MADVET · « **Reply #3 on:** April 29, 2012, 07:27:25 AM »

Jethro,

Are you refering to the shift fork? The bit that looks like a horseshoe on the inside and is conected to a shaft that comes through the cover plate onto which the shifter linkages are bolted on to?

If so searching for "muncie shift fork" comes up with a number of vendors, seen a few for sale on US ebay too.
I've broken a few of these in the past with my old muncie, apparently they don't appreciate the finer points of flat changing.

Jethro · « **Reply #4 on:** April 29, 2012, 07:43:38 AM »

Quote from: MADVET link=topic=9179.msg1045942628#msg1045942628

Jethro,

Are you refering to the shift fork? The bit that looks like a horseshoe on the inside and is conected to a shaft that comes through the cover plate onto which the shifter linkages are bolted on to?

If so searching for "muncie shift fork" comes up with a number of vendors, seen a few for sale on US ebay too.
I've broken a few of these in the past with my old muncie, apparently they don't appreciate the finer points of flat changing.

No buddy I'm after the actual shifter shafts that go through the side cover and in fact the shift fork connect to em?????

Jethro · « **Reply #5 on:** April 29, 2012, 10:05:36 AM »

Found....

http://www.ebay.com/itm/MUNCIE-4-SPEED-SIDE-COVER-KIT-ROLLER-BEARING-18-410-023-1X-/350560902025?_trksid=m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D8049747154544401997#ht_500wt_971

bfit · « **Reply #6 on:** May 03, 2012, 05:50:37 PM »

Jeff
How's the box going
Did you source the parts
Bfit

Jethro · « **Reply #7 on:** May 03, 2012, 06:02:39 PM »

Quote from: Bfit link=topic=9179.msg1045942677#msg1045942677

Jeff
How's the box going
Did you source the parts
Bfit

Yeah Rob, www.Garagemotorsports.com and got them to send out new 1-2, 2-3 and reverse shifter Levers too:grr:

just waiting on them to arrive and the box is good to go!