« previous next »
Pages: [1]   Go Down

Author Topic: TEMPERATURE GAUGE  (Read 5727 times)

0 Members and 1 Guest are viewing this topic.

Offline Pure Filth

  • Newbie
  • *
  • Posts: 1
TEMPERATURE GAUGE
« on: November 28, 2003, 11:23:29 AM »
Is there some one that knows how to test a temperature gauge with out having to pull it out of the car to see why it is not working properly.
Ihave replaced the sending unit but the gauge still climbs off the dial when the car has been just started.
Any help would be appreciated.
Logged

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
TEMPERATURE GAUGE
« Reply #1 on: November 28, 2003, 03:49:41 PM »
I'm sure the guys from Southern Radiators would be able to help you out. Don't have their phone # handy at the moment, but you'll find it in the club mag.
Logged
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes

Offline david_moore

  • Four Barrel
  • ***
  • Posts: 128
TEMPERATURE GAUGE
« Reply #2 on: November 28, 2003, 10:01:12 PM »
Hiya Filth!
Disconnect sender unit wire, see if the guage goes to zero. If not, ground wire to something of negative polarity (engine block), does it now go to zero? Check that engine block has a good negative connection. Measure voltage at sender unit wire, I would think it should be 12 volts. If this does not help I think you will have to pull the guage out. Give us a call if you want. Good luck mate.:drink
Logged

MJ355

  • Guest
TEMPERATURE GAUGE
« Reply #3 on: November 28, 2003, 11:04:01 PM »
Here is the number for Fred Ogden From Southern Suberbs Radiators 9547-2620
Logged
Pages: [1]   Go Up
« previous next »