Author Topic: replacing hand brake handle  (Read 6338 times)

0 Members and 1 Guest are viewing this topic.

Offline 69MLC

  • Two Barrel
  • **
  • Posts: 32
replacing hand brake handle
« on: June 16, 2011, 04:56:13 PM »
hi all, any tips on replacing a 69 hand brake handle? looks to have at base one steel pin. Is this just tapped out? any feed back on proper percedure would be appreciated . regards murray

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
replacing hand brake handle
« Reply #1 on: June 17, 2011, 10:30:25 AM »
mate
 I will dig my 69 service manual out tonight and copy relevant  section
If there is one
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
replacing hand brake handle
« Reply #2 on: June 17, 2011, 03:28:45 PM »
It  looks like a roll pin
I have not  looked at manual as get
But I would make a puller  
 if that hole  goes rite through
get a bolt that fits  that you can  slide a piece of pipe over
YOU will need some washers  
 and a nut on the other end and tighten slowly and see if it moves
NO hammers    if possibly
be back to you on this

I have a 69  I will be working on tonight I may be able to help tomorrow
Bfit

 
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline 69MLC

  • Two Barrel
  • **
  • Posts: 32
replacing hand brake handle
« Reply #3 on: June 17, 2011, 03:58:26 PM »
thanks Bfit

Offline 72vet

  • Supercharged
  • ******
  • Posts: 1676
replacing hand brake handle
« Reply #4 on: June 17, 2011, 04:35:03 PM »
Hi Murray, this might help. Had to take the pages with the camera, my scanner decided to have a dummy spit for some reason. :beer:









CLICK ME to see my albums.

Offline 69MLC

  • Two Barrel
  • **
  • Posts: 32
replacing hand brake handle
« Reply #5 on: June 17, 2011, 07:26:52 PM »
72vet, thanks for that. exactly what im after. I didnt have any info in either the AIM or service manual i have. Where was that info found? thanks again regards Murray:beer:

Offline 72vet

  • Supercharged
  • ******
  • Posts: 1676
replacing hand brake handle
« Reply #6 on: June 17, 2011, 07:46:14 PM »
Happy to help Murray,

I purchased a new brake handle from Corvette Central and it came with the diagram.

Have a look at their Tec section http://tech.corvettecentral.com/   interesting articles in it

Some of our C6 Guys might find it helpful :smirk:


Nick
CLICK ME to see my albums.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
replacing hand brake handle
« Reply #7 on: June 18, 2011, 11:01:06 AM »
72`s post is excellent

The service manual I have  shows Zip
the replace  park  brake cable  is very basic
above is  the sort of thing the manuals should show
Bfit  
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Camo

  • Jethro is my nemesis
  • Administrator
  • Supercharged
  • *****
  • Posts: 2685
  • Joe Pappas Missile Builder
  • Location: In The Ether
  • Car: 77. 355 ci 400hp
replacing hand brake handle
« Reply #8 on: June 21, 2011, 11:30:11 AM »
PDF versions of of 72vet's images available here for downloading and printing

Number One

Number Two
Time, The Predator That Stalks Us All

Black is not a colour, it's a life style