Author Topic: Rear Q - panel carpet  (Read 7112 times)

0 Members and 2 Guests are viewing this topic.

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 701
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
Rear Q - panel carpet
« on: January 10, 2012, 09:56:36 PM »
Attempted to fit a moulded carpet from Auto Custom carpets today supplied from Ecklers  the mould for a 69 roadster may have fitted about 20 years ago not even remotely close anyone found a supplier which is half close to fitting  for rear Q-panels

Offline wabco40

  • Fuel Injected
  • *****
  • Posts: 556
  • Location: Perth
Rear Q - panel carpet
« Reply #1 on: January 12, 2012, 09:27:35 AM »
Quote from: sirfixalot link=topic=9008.msg1045941840#msg1045941840
Attempted to fit a moulded carpet from Auto Custom carpets today supplied from Ecklers  the mould for a 69 roadster may have fitted about 20 years ago not even remotely close anyone found a supplier which is half close to fitting  for rear Q-panels


I used a ACC carpet set for my 71 coupe. I purchased it several years prior to fitting it. The moulded pieces had gone quite flat from being packed in a box for so long.
I left each piece in the sun for awhile which helped retain it's moulded shape and made it easier to fit each section.
The rear quarters are by far the worst to do and at first I though they would not fit, however with a bit of heat and trimming got them to fit well.
Having said that it's not a job I would like to do again:grr: