Technical Tips > Body Parts - Bodywork - Paint

1969 Rear Emblem Drilling Template

(1/2) > >>

Norms 69 Vet:
I am at nearing the end of my restoration and need to fit the rear CORVETTE emblem.

Does anyone know where I can get a templete showing the drilling layout.

Camo:
Welcome to the site. :hi:

I'm sure one of the lads will chime in when they come on line.

If not Scott from Corvette Alterations (Club Sponsor) may be able to help you out.  His details are at the bottom of the forum

72vet:
Welcome to the Forum, :grin:

What’s your location in Aus? My car is at the panel shop having a few repairs; if you like I can make a template and send it to you.

sirfixalot:
Make one using a compass & cardboard trial fit badge pins to template then put masking tape on filler lid & transfer hole positions off template to filler lid

Norms 69 Vet:
Hi 72 Vet\\I am located in Sydney, I have not attended the meetings for a while, but will be at the next meeting, so if not too much trouble that would be much appreciated.

Navigation

[0] Message Index

[#] Next page