Technical Tips > Importing - Cars & Parts. Also RMS (RTA) Regs

Z06 seats

(1/2) > >>

bfit:
HAS any one fitted a set of z06 seats to a C3
 Are they to tall to fit
Bfit

Scott:
From a C6 or C5?
From what I remember, C5 will fit but may be too high if you use the electric base. If you bolt them to manual rails, they should be fine.

New project - C5 Z06 seats

bfit:
Thank You Scott
BFit

RHT:
I've fitted C6 seats to my 78.
Initially kept the electric mechanism but this rasied the seats approx 40-50 mm higher than original. Not too good for driving.
Ended up removing the electrics and bolting the original seat tracks to the seats. Sits a little higher than the old seats but they were shot so I think the height they are now would be close to a standard seat height. Kept the the pumps for the lumbar and bolster support though.
Great seats - very comfortable.

Robert

bfit:
thanks  Robert
I like the C6 seats  more so than the C5
I will find some thank  you again
do you have a photo of hoe it turned out
I will U2U my email if you do
Bfit

Navigation

[0] Message Index

[#] Next page