Author Topic: C4 front suspention  (Read 3465 times)

0 Members and 1 Guest are viewing this topic.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
C4 front suspention
« on: May 05, 2011, 11:07:39 AM »
Would any one be able to tell me the actual difference
between 84/87 and 88/96 front suspension
As I research   modifications to chassis  etc  for my C3
I keep seeing reference   to the  two being different
But  CAN NOT FIND  WHAT IS THE DIFFERENCE IS

can any one help

BFit  
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
C4 front suspention
« Reply #1 on: May 06, 2011, 04:36:27 PM »
I do no know how I managed to group this in with the convention  notice but I DID
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Thunder Kiss

  • Four Barrel
  • ***
  • Posts: 229
    • http://photobucket.com/albums/v290/ThunderKiss/
C4 front suspention
« Reply #2 on: May 06, 2011, 05:20:13 PM »
I don't know the exact difference but I assume the upper and lower arms on the 88/96 models are longer by around 18mm per side, but that may be too simplistic an assumption.
84/87 16x9.5" wheels have a +38mm offset while 17x9.5" 88/96 wheels have a +56mm offset, an 18mm difference, yet there is no difference in the width of any of these cars (except ZR1, but that's another story).

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
C4 front suspention
« Reply #3 on: May 06, 2011, 05:33:47 PM »
thank you Thunder Kiss
I have found out that the rear ISR  assembly is about 2" short over all   axle flange to axle flange  early C4 to later C4
I have been told that  some of the parts for the earlier rear  assemble are getting hard to get as GM no longer support that set up ( yet to be proved )
All assistance is appreciated

Thank YOU
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill