Author Topic: How to Tune a Holley  (Read 5009 times)

0 Members and 1 Guest are viewing this topic.

Offline Camo

  • Jethro is my nemesis
  • Administrator
  • Supercharged
  • *****
  • Posts: 2685
  • Joe Pappas Missile Builder
  • Location: In The Ether
  • Car: 77. 355 ci 400hp
How to Tune a Holley
« on: October 30, 2010, 03:29:59 AM »
A paper by Lars Grimsrud

Overview
Holley carbs have been used by hot rodders for many decades now. Holley offers a very tuneable, modular
carb design, yet it’s surprising how few people understand the basic tuning principles and procedures for
these carbs. This tech paper will discuss some basic tuning procedures and techniques to help you get your
setup optimized a little better.

Holley carbs have several operating systems, all of which can be tuned independently. Often, an improper
setup of one system will give false indications of a problem in another system. Attempting to cure Holley
problems by tuning the wrong system results in a really messed up carb, and a lot of frustration for tuners
and car owners.

Holleys have the following basic operating systems:

Idle System
Accelerator System
Main Metering System
Power System
Secondary System

These systems at times overlap in their operation. Not only does each system need to be properly tuned,
but its timing and “overlap” with other systems is critical to proper performance.

This tech paper will discuss basic set-up and tuning of Holley vacuum secondary carbs for optimum street
performance and drivability.

To read the full version of this paper CLICK ME

Time, The Predator That Stalks Us All

Black is not a colour, it's a life style