Restoration & Modification Projects > Restoration Projects
71 rebuild
bfit:
Looks like you are running a reasonable amount of camber on those front wheels
Bfit
Jethro:
Bloody Beautiful BradO, love that wipe door conversion :)
wabco40:
--- Quote from: Jethro on December 07, 2017, 06:36:22 PM ---Bloody Beautiful BradO, love that wipe door conversion :)
--- End quote ---
Thanks Jethro
wabco40:
--- Quote from: Bfit on December 07, 2017, 06:16:14 PM ---Looks like you are running a reasonable amount of camber on those front wheels
Bfit
--- End quote ---
Your right Bob, when I lowered the front it brought the camber in quite a bit. I don't have too many shims left in the upper control arms and what's there if I removed wouldn't make much difference.
I would like a pair of drop spindles to correct the issue and still have it lowered, but unfortunately there not available for C3s.
bfit:
check out the late 60`S Impala spindles .
They will bolt into the corvette A arms , you will need to change your wheel hubs as the impala uses the camaro / holden Wheel bearings . Blank Huds are available here in Aus, for a brake upgrade for the Vt commodore. You can drill your own bolt pattern.
You would need to adapt your brakes to suit the updated spindles
Fatman and other make 2’’ drop spindles for the impala.
Bob
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version