Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres

stud pattern difference c3 and c4

(1/2) > >>

87droptop:
Hi all, would anyone know the exact wheels stud measurments for a c3 and a c4( or holden, bmw), i can get these adaptors from the US but i need to know the original size to make fit the holden/bmw/c4 wheels onto the c3.
THANKS...

gtc:
This site may help. It lists the PCD (or bolt pattern) for Vettes:

http://www.vehicle-bolt-pattern.com/chevy-lug-reference-guide.html

87droptop:
thank you

87Z51:
Problem is going to be wheel offset / backspacing differences; very big on C4 rims ( 6"+ ).
By the time you space the  rim out to clear suspension may be too far outside guard
PM me if you want to borrow a C4 rim to test fit

87droptop:
thanks mate, i do also have a c4 with 18" wheels, and i was told the offset is very big on that, but my main issue is that i was told that the stud pattern varies, so i was going to get 2" spacers that fit a c3 then the other end will be a c4/holden/bmw pattern, then i have a much greater choice when picking the wheels for the c3. so from what you know, you think c3 and c4 stud patterns are the same?? i can see a very deep dish on the c3 standard wheels, i'm sure not many other wheels will fit, but then by doing this i might have a lot more options. Thanks again.

Navigation

[0] Message Index

[#] Next page