Author Topic: cold start injector  (Read 8545 times)

0 Members and 1 Guest are viewing this topic.

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
cold start injector
« on: September 12, 2003, 03:13:53 PM »
How feasable would it be to somehow break into the cold start wiring to make a switch you could use at WOT to use the cold start injector for more fuel/power?

Or am I thinking too much again?  ;ay

Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
cold start injector
« Reply #1 on: September 12, 2003, 04:57:57 PM »
You wanna crack 200rwhp pretty bad eh? :22

I think you are thinking too much.  I have heard of people deleting it (with aftermarket intakes) but not of using it to richen up the mixture while under power.

I don't know if it is located well to do what you are thinking of anyway.

Personally, I'd use an adjustable regulator to add more fuel under load and when I managed to get my car to make enough power to max out the stock injectors I'd change them to higher flow units.
"Life's tough.  It's tougher when you're stupid"