Author Topic: Ignition control modules (Read 7436 times)

stevemx · « **on:** November 11, 2009, 02:50:59 PM »

Hi,
Can anyone tell me if there are and versions of a Gen2 that came out with distributorless ignition?
I have a Lt1 5.7L MPI corvette engine in my ski boat which is fitted with a ignition module and 4 individual coils, the motor is marinised by Indmar, i am trying to get hold of a new Ignition Control Module .
i cant seem to find any variants that run this type of ignition, they all seem to have optispark.

any help would be much appreciated

gtc · « **Reply #1 on:** November 11, 2009, 04:38:45 PM »

Quote from: stevemx link=topic=7424.msg1045936307#msg1045936307

the motor is marinised by Indmar, i am trying to get hold of a new Ignition Control Module .

Assuming it's an Indmar ignition module, have you tried Indmar themselves?

INDMAR MARINE ENGINES AUSTRALIA
823 Hope Ct
Albury, NSW 2640, AUSTRALIA
phone: +61 2 60255677
fax: +61 2 60258556

stevemx · « **Reply #2 on:** November 11, 2009, 05:06:10 PM »

I have tried Indmar Australia and 2 dealers, they seem to think its a GM product and the module isnt made specifically for Indmar.
They can get one from the states, and as you can imagine for an extortionate price!

gtc · « **Reply #3 on:** November 11, 2009, 05:09:02 PM »

Are there any identifying numbers of the unit in question? If it's GM part there ought to be a GM part number on it.

It would probably help if you posted a clear photo of it, too.

How to:

http://nswcorvettes.com.au/forum/viewthread.php?tid=3329

stevemx · « **Reply #4 on:** November 11, 2009, 05:52:57 PM »

no it doesnt have a GM part number but i will post a photo of it tomorrow
cheers

87Z51 · « **Reply #5 on:** November 14, 2009, 02:49:16 PM »

Quote from: stevemx link=topic=7424.msg1045936307#msg1045936307

Hi,
Can anyone tell me if there are any versions of a Gen2 that came out with distributorless ignition?
I have a Lt1 5.7L MPI corvette engine in my ski boat which is fitted with a ignition module and 4 individual coils, the motor is marinised by Indmar, i am trying to get hold of a new Ignition Control Module .
i cant seem to find any variants that run this type of ignition, they all seem to have optispark.

Not in a production Corvette.
As you have found out all LT1's had the the Optispark
Yours is probably the aftermarket Delteq 4 coil conversion ; uses a Delphi ignition module
Does your module look like this ?

http://www.delteq.com/

http://www.delteq.com/products_opti.htm

stevemx · « **Reply #6 on:** November 16, 2009, 11:30:38 AM »

No thats not the same, i have discovered that the module is interchangable with the unit used on cadillac Northstar engines, which are easy to get your hands on.
But thanks for your help guys