Restoration & Modification Projects > Modification Projects
My Black Bitza
Scott:
I didn't measure it, but the diff on mine seemed pretty close to 0 degrees. Tonight I'll be pulling the headers off and trying to get the mounts to fit. If I get around to it, I'll pump up the rear tyre and try measure some angles. I'll be using a phone app, so not the most accurate, but should give a reasonable idea.
bfit:
mate it is surprising how accurate the phone might be
mate sure you zero it against a level an see how you go
Bfit
Scott:
My phone is 5 years old, so the technology may not be that advanced. It's great for taking pics while I'm working in the shed though. Nokias last forever.
Scott:
On the weekend I cut the mount off the bracket supplied with the kit and re-welded it 20mm higher. Final result the gearbox now sits a fair bit more level. I'll have to fiddle with the diff angle a little but I should be able to get it to match now.
bfit:
hi scott
Make sure that the rear of your transmission is higher that the diff input.
if the trans is lower than the diff, with the trans angled down toward the rear you will have a problem.
Bfit
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version