Technical Tips > Post 84

DOT vs ADR approved parts

(1/2) > >>

Vetteboy:
Hi everyone,

I need new brake lines for my C4.  I was looking at getting a DOT approved set from the US, however I am unsure of how this is viewed by insurance companies and Queensland Main Roads? Can anyone shed some light on this topic....

Thanks in advance.

77CVT:
Are you after stock replacements or braided?  Stock is fine but the braided is not approved over here, although I can't see what the problem is.

You can always take the lines you have to a brake place and they can fit up new lines using the old end fittings.  This works out a lot cheaper than getting them from the states.

Vette Obsessed:
I think you can have braided lines fitted legally over here but they have to have teflon used in the end fittings to be legal.  The old (non-teflon) design is prone to snapping at the ends which is why they are illegal.

Depending on where you buy from, you can get braided lines locally and they won't cost much (if anything) more than bringing them in from the states.

I pretty sure my Goodridge braided lines are legal, the shop I bought  them from said they were and my insurance company didn't baulk when I told them about them being on my car.

Brutus:
The main reason they are or were frowned upon over here is that there was no way to inspect the lines externally for deteration with the braided covering.
As for rubber (original) lines being cheaper over here that the US, you can forget that theory. I bought a set (rear) of genuine GM hoses for around US$20.00 but when I had a set for the front made up here I was up for over A$100.00! Braided hose sets front and rear are approx $60 US and I will be getting a set when I go over next year. Who wants a set?

77CVT:
Brutus - add that to the cost of an airfare and getting them done here is cheaper!  If you can ship them past customs in the post then you may be in front but who wants to wait a couple of weeks for them to get here?

Navigation

[0] Message Index

[#] Next page