Author Topic: WHEEL ALIGNMENT  (Read 5726 times)

0 Members and 2 Guests are viewing this topic.

Offline david_moore

  • Four Barrel
  • ***
  • Posts: 128
WHEEL ALIGNMENT
« on: December 30, 2003, 07:06:43 PM »
Does any one know the specs. for camber, caster and toe in of the front and rear wheels of a 1991 Corvette? I guess, who has a factory manual and would kindly look this up for me? At long last the '91 is almost ready for a blue slip, got new tyres today and it is always good to be able to talk alignment specs. with the Technician doing the alignment. HAPPY NEW YEAR TO ALL!:22:drink:22

Offline johnny86convert

  • Four Barrel
  • ***
  • Posts: 193
WHEEL ALIGNMENT
« Reply #1 on: December 31, 2003, 08:23:08 AM »
dave,  I  have  the  factory  manauls  for  an  88,  will  those  specs  help??  ;);););)

Offline ben73

  • Two Barrel
  • **
  • Posts: 18
WHEEL ALIGNMENT
« Reply #2 on: December 31, 2003, 06:01:12 PM »
Have a look here, this page is on the VetteBrakes website:
http://www.vbandp.com/instructions/htmlinstruct/align.htm

Ben.
Red/Red '84  12.4@111.6mph

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
WHEEL ALIGNMENT
« Reply #3 on: January 05, 2004, 01:37:09 PM »
If you got big tyres you won't want to run a lot of camber on the street - maybe .5 deg at most.  I usually run about 1mm toe (in), around .4 - .8 deg camber (ft) and up to .5 deg camber (rear).  Rear toe (in) 1-1.5mm.

Works well for aggressive driving and occasional trackwork.

Cheers