Technical Tips > Pre 84

C3 seat rails

<< < (2/2)

69 DIRTY RAT:
4 inches longer :p

sirfixalot:
I fitted 81 seats to my 78 the right hand seat bolted straight in left hand seat had to use top half of  of 81 runner & bottom half of 78 runner so I didnt have to redrill floor, also the pitch of the teeth for seat adjuster was different. Also had to cut & shut the adjuster arm.Took half a day to sort  out a pair of runners for left hand seat.

77CVT:

--- Quote ---Originally posted by 69 DIRTY RAT
4 inches longer :p
--- End quote ---


Yeah, go figure.  I'll have a chop at them this weekend.

Chromie - got any "normal" C3 rails in case I accidently smash it to pieces?  :24

Chromie:

--- Quote ---Originally posted by 77CVT

--- Quote ---Originally posted by 69 DIRTY RAT
4 inches longer :p
--- End quote ---


Yeah, go figure.  I'll have a chop at them this weekend.

Chromie - got any "normal" C3 rails in case I accidently smash it to pieces?  :24
--- End quote ---


Hi 77CVT;ay
Yep I have a second hand set of seat tracks off a 1970 or 71 vette;27
I don't know how much they are at this point as I have not received the paper work from the USA yet.;30
I would recommend modifing the seat tracks and not the floor pan
Just make an adaptor plate, the plate bolts to the floor and the seat track bolts to the plate.

77CVT:
;42

I was going to drill out the rivets on the back part and reattach them in the proper position.  It's still got me beat why they are different!

Navigation

[0] Message Index

[*] Previous page