« previous next »
Pages: [1]   Go Down

Author Topic: My Motor  (Read 5726 times)

0 Members and 1 Guest are viewing this topic.

Offline rebel

  • Four Barrel
  • ***
  • Posts: 238
My Motor
« on: April 08, 2003, 10:40:30 PM »
OK gang,

Here's Version 2.1 ... pretty much the same as version 2.0, except that the rocker covers have a nice aluminium textured surface and the raised letters are as highly polished as I can get 'em ....

Motor1
Motor2
Motor3

With the extractors ceramic coated she's pretty much done except for ideas of a Rebel mural under the bonnet and the words "CorvetteRacing" across the front cross member. After that, tidy some cabling and add the FULL STOP to that project!

Cheers!!
Logged

Offline Scott81

  • Four Barrel
  • ***
  • Posts: 88
    • http://www.c3sharktank.com/
My Motor
« Reply #1 on: April 09, 2003, 11:17:59 AM »
Very nice rebel, just don't let Brutus near your car with his polish, you'll never get it back.  Did you coat the inside of those rocker covers with anything?  I was looking at buying those but was told they should be coated with glyptal inside first as they seep oil.
Logged
When I start my car I want my neighbors to think the end of the world is coming.  - Homer Simpson

Offline rebel

  • Four Barrel
  • ***
  • Posts: 238
My Motor
« Reply #2 on: April 09, 2003, 09:09:24 PM »
Scott81, I usually only let professionals polish my car .... ;laugh

Only jokin' Brutus, I'm certain you do a fine job .....

I did actually coat the inside and think it was called Glyptal. I'll confirm and let you know.
Logged
Pages: [1]   Go Up
« previous next »