Technical Tips > Importing - Cars & Parts. Also RMS (RTA) Regs

seatbelts

<< < (2/3) > >>

WARFRIN:
I believe that the seat belts must be equal to what was required for similar vintage car manufactured/registered/imported for that model year. Additionally the belts must have the approval label that states they are Australian Standards or similar in compliance. There is info available at the DOTARS web site and for us in NSW the RTA web site. Generally the state authorites are following the DOTARS guides. I bought a set of lap/sash retractables from the US but have been told they won't cut it for NSW rego due to "compliance" label/tag.

humphbri:
Thanks fellas

I will probably buy a shoulder harness set for Andover Automotives in the US.  As long as they have US compliance tags on them I shold be fine.

Thanks again everyone;42

BOSCHVETTE:

--- Quote ---Originally posted by humphbri
Thanks fellas

I will probably buy a shoulder harness set for Andover Automotives in the US.  As long as they have US compliance tags on them I shold be fine.

Thanks again everyone;42
--- End quote ---



Mate they will not allows U.S seat belts,it has to have a Australian standards tags on them or they will not pass them.

69 DIRTY RAT:
yes its got to have aussie tags!

reserved:
;wtf

Mate they will not allows U.S seat belts,it has to have a Australian standards tags on them or they will not pass them.[/quote]

Would that would mean 90% of the Corvettes in the club would not comply

;45

Navigation

[0] Message Index

[#] Next page

[*] Previous page