Technical Tips > Engines - Carbies - Exhausts - Dissys

oil down

(1/1)

onya:
Started motor had a gusher of oil pour out of the motor, gallons, checked oil filter, switch above it ,there OK, seems to be back of valley cover, may be oil pressure switch. Is there any easy way to remove the switch without taking the dizzy out. Bitch of a place for something to go wrong ;50 ;(

onya:
removed the wiper motor, which gave good access to the switches, removed both switches after attaching it to the air compressor found smaller one was the offending switch. Next in line buy new switch. Then degrease all of the vette.

Cameron 77C3:
Bugger.  You must have a mess.  Watch it when ya wash it down that you dont get water in the ingition leads, plugs etc.

Navigation

[0] Message Index