Author Topic: Extractors for C3  (Read 6846 times)

0 Members and 1 Guest are viewing this topic.

Offline GoldDigger

  • Two Barrel
  • **
  • Posts: 22
Extractors for C3
« on: November 23, 2007, 09:25:39 AM »
I plan to put extractors on my C3 & would like to know who supplies ceramic coated to suit a 350 C3  RHD.

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
Extractors for C3
« Reply #1 on: November 23, 2007, 09:34:50 AM »
Unfortunately you'll have to get them custom made.

Offline reserved

  • Four Barrel
  • ***
  • Posts: 162
Extractors for C3
« Reply #2 on: November 23, 2007, 12:23:23 PM »
;eek :mmm ;eek

Have a look at Corvette Central part number 322234.
It may suit.

;27

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
Extractors for C3
« Reply #3 on: November 23, 2007, 01:18:51 PM »
All that really needs to be done is for the RHS, cut the No1 tube and reroute over the top to clear the steering box.  You could buy stock ones and have that side redone and save some $$.

;42

Offline MADLT1

  • Supercharged
  • ******
  • Posts: 1121
Extractors for C3
« Reply #4 on: November 23, 2007, 05:03:48 PM »
hi 69fan,check out liverpool exhaust centre,96023111,41 seton road,moorbank.they do quality work with mandrel bending.

Offline Darylle

  • Two Barrel
  • **
  • Posts: 37
  • I'm new here
  • Location: Wollongong
Re: Extractors for C3
« Reply #5 on: August 20, 2017, 10:52:47 AM »
Hi all
Is there an "off the shelf" set of extractors available yet? I have been told I need to go with block huggers, can anyone suggest any other option?
Thanks Darylle

Offline Darylle

  • Two Barrel
  • **
  • Posts: 37
  • I'm new here
  • Location: Wollongong
Re: Extractors for C3
« Reply #6 on: August 20, 2017, 01:50:29 PM »
I just found some "castle" brand extractors to suit Holden HK-T-G with small block on engine master (CH-116A) and by the looks of it the front pipes travel horizontally back from the port (not down)  I wonder if this vehicle model had similar steering box clearance issues?