Author Topic: ANY GOOD MECHANICS OUT THERE!!  (Read 10347 times)

0 Members and 1 Guest are viewing this topic.

Offline 69 DIRTY RAT

  • Supercharged
  • ******
  • Posts: 1170
    • http://www.ratpackmuscle.com/
ANY GOOD MECHANICS OUT THERE!!
« on: April 30, 2003, 06:35:40 PM »
HEY BRUTUS ,YOU MUST KNOW OF SOMEONE IN THE SHIRE THAT WONT STUFF ME AROUND THAT CAN PUT MY ENGINE BACK TOGETHER IN A HURRY.I'M DESPERATE.IT ONLY NEEDS THE RIGHT HEAD AND INTAKE MANIFOLD ,EXTRACTORS RIGHT ONLY AND WIRED BACK UPOH BRUTUS OF MUCH WISDOM HELP ME!
http://ratpackmuscle.com/ SCARY TOUGH MUSCLECARS

69 540ci, 755HP 734FtLb RAT, 629rwhp

*I LUV MY '69 ZL-1 540ci VETTE, AND SO DOES YOUR GIRLFRIEND!                   

Offline david_moore

  • Four Barrel
  • ***
  • Posts: 128
ANY GOOD MECHANICS OUT THERE!!
« Reply #1 on: April 30, 2003, 06:48:54 PM »
Steve from SR Performance may be able to help you, rather would help you, do not know how busy he is. He advertises in the Club mago. I also know some friends who are mechanics at Botany, they may not be real quick tho. Good luck ;30

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
ANY GOOD MECHANICS OUT THERE!!
« Reply #2 on: April 30, 2003, 08:12:52 PM »
I've had no actual experience yet with this guy, but I fully intend to use him for my engine rebuild...Sam's Performance at Padstow. He's been mentioned by quite a few in the club as well as hearing him mentioned at the off street drags at Eastern Creek too.
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes


Offline david_moore

  • Four Barrel
  • ***
  • Posts: 128
ANY GOOD MECHANICS OUT THERE!!
« Reply #3 on: April 30, 2003, 08:24:38 PM »
A few of my mates swear by Sams Performance, and I must admit I had forgotten about him. He built a motor for a friends VK Commodore, nothing special, but does 13 sec quarter miles, not bad for a mildly modified 308.

Offline rebel

  • Four Barrel
  • ***
  • Posts: 238
ANY GOOD MECHANICS OUT THERE!!
« Reply #4 on: April 30, 2003, 10:59:12 PM »
69, I recommend SR Performance as mentioned by DM above. Whatever he doesn't know will be more then compensated by his partner Peter's experience. His number is 95675007.

I can personally vouch that he will not stuff you around.

I have no experience with Sams so can't comment on that one!

Offline 69 DIRTY RAT

  • Supercharged
  • ******
  • Posts: 1170
    • http://www.ratpackmuscle.com/
ANY GOOD MECHANICS OUT THERE!!
« Reply #5 on: April 30, 2003, 11:37:10 PM »
I got my carb done at sams last year and got the car dyno tuned which was good.But at the time I asked about doing the engine,he said it would take about 9 months!  and thats similar with SR .what I need now is someone to finish the car in 2 days,yes 2 days.It only needs right head and right header and the manifold back on!.I have taken my car out of the place where it was at because they were to busy to finish it off, so I booked it in for monday at another place with the promise it would only take 2 days.so here I am now and they havent started yet,so I'm trying to look for another place!
http://ratpackmuscle.com/ SCARY TOUGH MUSCLECARS

69 540ci, 755HP 734FtLb RAT, 629rwhp

*I LUV MY '69 ZL-1 540ci VETTE, AND SO DOES YOUR GIRLFRIEND!                   

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
ANY GOOD MECHANICS OUT THERE!!
« Reply #6 on: May 01, 2003, 07:26:35 AM »
I'm going to a place this morning to get my daughter's car passed for rego so I'll ask them. They're at Kirrawee.
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes


Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
ANY GOOD MECHANICS OUT THERE!!
« Reply #7 on: May 01, 2003, 09:23:46 AM »
Well I struck out with the mechanics.....too busy. They're closing up in a week or so to head down to Tassie for the Targa. How about we all get together and put a Vette in the Targa for a bit of fun?:b2
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes


Offline Adam

  • Four Barrel
  • ***
  • Posts: 203
    • http://homepages.ihug.com.au/~turon/photo/index.htm
ANY GOOD MECHANICS OUT THERE!!
« Reply #8 on: May 01, 2003, 04:18:59 PM »
geez, 69, thats cutting it close, id say do it yourself then!
1980 LG4 stock 305 running LPG.


I'm a highway staaaaaarrrr...

Offline david_moore

  • Four Barrel
  • ***
  • Posts: 128
ANY GOOD MECHANICS OUT THERE!!
« Reply #9 on: May 01, 2003, 06:38:47 PM »
Try Milton and Paul, both excellent mechanics, Milton is into gocarts and Paul - buses.....:b4 Nonetheless, both great mechanics, love their revvy cars as well, have had a few themselves. They are based at Botany and their phone number is 97001772. Best of luck!;30

Offline 69 DIRTY RAT

  • Supercharged
  • ******
  • Posts: 1170
    • http://www.ratpackmuscle.com/
ANY GOOD MECHANICS OUT THERE!!
« Reply #10 on: May 01, 2003, 08:38:41 PM »
I'm giving the guys one more day after telling them off.they couldnt understand the bit about urgent-they said that they had to fix the daily people that come in first,WHY?is mine not a car?.he couldnt explain!then he said that the cars coming in were booked in,MINE was booked in on monday.he ran out out excuses and agreed to TRY and get into it tonight.MORON.In other words it seems our cars are not counted the same as everybody elses cars even though we pay the same amount to fix!ANYWAY I've lined up somebody else just incase.but I'll keep that number handy DM.Brutus I have been thinking about doing a targa race at some stage,cause I dont think its to hard on your car unless you want to win or something.I just want to go in it for the fun!Tassie would be good cause its nice and cool!
http://ratpackmuscle.com/ SCARY TOUGH MUSCLECARS

69 540ci, 755HP 734FtLb RAT, 629rwhp

*I LUV MY '69 ZL-1 540ci VETTE, AND SO DOES YOUR GIRLFRIEND!                   

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
ANY GOOD MECHANICS OUT THERE!!
« Reply #11 on: May 01, 2003, 09:47:50 PM »
Andy...I know exactly what you mean about people who deal the way you've mentioned. I've had the same treatment from a local (supposedly reputable) exhaust shop recently. I told them exactly what I thought of their priorities and how they treat their customers on a preferred basis. It seems those who pay the most get theirs done first no matter whose in line first. Guess who doesn't get my business anymore...and I'll tell anyone who wants to know who they are too.
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes