Author Topic: steering box (Read 5588 times)

Shaun · « **on:** June 17, 2007, 09:01:34 PM »

Does anyone know the GM part number for a power steering pump seal kit .1985 ( same pump 84 -91)

If I know the number I will see if I can get the kit in Aus,
The Kit is only $20 US , but I would prefer not to pay for the postage as it will probably be more than the kit.

ozpont · « **Reply #1 on:** June 17, 2007, 09:52:47 PM »

Shaun.. theres a couple of different kits actually listed in the GM parts books for the 85 "ERA" but really only one pump listed... .. # wise.. try around for #36-350760 or U.S. Edelmann brand #8633. The kit is actually only $22 in Australia .. cheaper then the U.S. quoted you. .IF .. IF.. this is what your box should look like if re-doing the original. Also if the main bearing has gone.. # 26001378 should be used.. WHICH.. may be available from Holden..(try them too) .. it retails in the US for around US$12- $15 at a dealer or about A$16 there. Locally you might like to try "Uncle Sams" in Adelaide (Adrian Cowland) on 088 264 9556.. or Eagle Spares on 03 9793 5544 in Dandenong.

nifty · « **Reply #2 on:** June 17, 2007, 10:14:41 PM »

shaun you have a u2u

ozpont · « **Reply #3 on:** June 18, 2007, 10:48:16 AM »

Shaun.. the last listed GM # is 26024155.
Hope that helps.

Shaun · « **Reply #4 on:** June 21, 2007, 10:00:37 PM »

Thanks OZPONT for the part number,
Holden have a few in stock $7 , I bought 2 couldnt resist.

85V · « **Reply #5 on:** June 21, 2007, 11:39:57 PM »

Im new here but saw this and was going to say suggest some people called Ecklers.com where I brought one in april but thats was like US$45 with delivery so you got a good deal.