Technical Tips > Engines - Carbies - Exhausts - Dissys
Pacemaker extractors
Thunder Kiss:
I had some done a few years ago for $240, but I can't remember if it was Jet Hot or their opposition.
nifty:
could also try hooker headers....seen a 77 in s.a. with them.fitted nice.
69 DIRTY RAT:
Just a warning though...I would test fit first in case you have to make any adjustments then jet coat because it will crack the coating if you bend or dent it afterwoods!
TPI-383:
I have a set of short headers that I was told came from Ecklers in the US that are made for RH drive. The front pipe on the RH side goes over the steering box and they clear everything nicely. Don't know how well they work as my car is not on the road yet but they are large primary and 2.5 inch collectors.I will send you a photo if you give me an e-mail address.I have power steer box and have good clearance with them.
TPI-383
demonx:
--- Quote ---Originally posted by TPI-383
I have a set of short headers that I was told came from Ecklers in the US that are made for RH drive. The front pipe on the RH side goes over the steering box and they clear everything nicely. Don't know how well they work as my car is not on the road yet but they are large primary and 2.5 inch collectors.I will send you a photo if you give me an e-mail address.I have power steer box and have good clearance with them.
TPI-383
--- End quote ---
Just post the pic here for everyone to see: I'm sure theres others that are interested.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version