Technical Tips > Post 84

Torque setting

<< < (2/3) > >>

abacab:
Well... we tried everything to get the nut off...... finally after soaking.. heating and re-heating... soaking we finally got it off.... tight........ now for the TORX bolts... does anyone know the size off hand and do they have to be re-torqued... Thanks Col..

abacab:
Sorry.. what torque setting for the three TORX bolts... Thanks again Col

abacab:
I'm full of questions... but have no answers... I would like to help the members.. So my expertise is in digital photography.... I work at Camera House so if anyone needs any help in that area please feel free to drop me an email.... My web site is
                                                        www.connectacamera.com.au

please mension the corvette club in your questions....   Thanks Col..

Vette Obsessed:
I'm heading out to the garage to do some work on my car.  I'll refresh my memory as to what these bolts attach and check the torx sizes and let you know. ;42

White88:
Abacab, The hub to knuckle  torque settings are 59-73 lbs and are size 55 torx . BTW I found it easier and faster to remove the whole knuckle from the car, one of the torx bolts is a real pita to get to from under the car and plus mine wouldn't budge with a 1/2 " rattle gun, had to remove it from the car and put it  in a vise and use a very large bar. Thats my 2c worth.

Best of luck

Navigation

[0] Message Index

[#] Next page

[*] Previous page