General Discussion Area > Corvette Related Chat

HELP....my so called performance slug

<< < (10/16) > >>

MADVET:
The main cat is prone to collapsing and will progressively block the exhaust.(i had this problem once).
A mild or stock L98 should run closer to 100mph.
Could be running into the L98 out of breath zone with those 3.7 gears.

reserved:

--- Quote ---Originally posted by mrvett

--- Quote ---Originally posted by BOSCHVETTE
what colour is the car ?
it must not be red,cause red ones go faster,

you could understand if it was a banana coloured rat powered vette and it lacked grunt.
(sorry can not help myself);43;43;43;43;43
--- End quote ---


boshie it is red but jst a red pig in fact ;41
--- End quote ---


:{ :{ :{:
:bold :bold :bold

Big yellow bananas
are more in demand and cost a lot more than
big red apples
what is the moral of this
;35 YELLOW is cool ;27 ;27
:pinki red;54

mrvett:

--- Quote ---Originally posted by Vette Obsessed

--- Quote ---Originally posted by Garry Smith
I would consider a high 13 or low 14 to be OK for your Vette
--- End quote ---


I'd agree but with the 3.73's in an auto car I'd expect a little better - maybe consistent 13.XX ET's (with everything else being equal/up to the task).

Is it me or does the MPH look a little low guys?  

What was your 60ft time mrvett?
--- End quote ---


my 60ft time was 2.014
with a quarter mile time of 14.092 @ 94.93mph

u reckon its gettin sluggish in da top end?

BOSCHVETTE:
it is definately losing top end somewhere.put a broom stick through the cat and see how you go.

Vette Obsessed:

--- Quote ---Originally posted by mrvett
my 60ft time was 2.014
with a quarter mile time of 14.092 @ 94.93mph

u reckon its gettin sluggish in da top end?
--- End quote ---


In my opinion that is a good enough 60ft time for the ET you are running and for a stockish L98.  I agree with Boschvette and others who say you are missing some top end.

In my opinion you should be doing around 99-100mph trap speeds.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version