Author Topic: What kind of brake fluid do you use? (Read 5165 times)

jolinari · « **on:** March 22, 2006, 06:51:22 PM »

please tell us what kind of break fluid u use?

72vet · « **Reply #1 on:** March 22, 2006, 09:26:57 PM »

Joe I recently replaced the fluid in mine cost was around $40.00 (full evacuation of lines and master cylinder )best $$$ I have spent ,had air in the rears now it stops. stop's well as to what fluid they used ;30 :evil

jolinari · « **Reply #2 on:** March 22, 2006, 09:39:21 PM »

Quote

Originally posted by 72vet
Joe I recently replaced the fluid in mine cost was around $40.00 (full evacuation of lines and master cylinder )best $$$ I have spent ,had air in the rears now it stops. stop's well as to what fluid they used ;30 :evil

did u do it urself Nick?
i got my mechanic to do it...can b messy

read this link...it is intresting

http://www.advanceautoparts.com/english/youcan/html/ccr/ccr20011001bb.html

Shane Finn · « **Reply #3 on:** March 22, 2006, 10:36:16 PM »

Try Castrol Super Dot 3 from Repco. It has a boiling point much higher than you might expect for a cheap DOT3 fluid - close to much more expensive DOT4 fluids. Also I recommend getting some Earls speed bleeders to help with the bleeding.

I bleed mine about 12 times a year (whenever I change back and forth from race pads) and replace the fluid completely yearly. I have a Mity-Vac vacuum bleeder but find that the speed bleeders are just as good if you don't want to buy the vacuum bleeder.