Items for Sale by Club Members & Friends > Wanted to Buy

A/C 1980 C3

<< < (4/4)

sirfixalot:
If you send me a DM with your phone no will send you some pics of my C4 which I have recently finished

blackleroy44:
Thanks, but don’t quite know how to DM

Vettech:
Sorry 4 V delay. But finally got into garage and could find only the underfelt which has a alli foil backing & is ~10-13mm thick.
Has no labels, but im pretty sure I got it at Pep's at W'park.

Could find none of the (I think Dynamat) but im sure it was the same as Sirfixalot.

The tunnel gets hot, so you need to (esp on C3) check the seals are in place, this heavy closed cell foam can be obtained from Clark Rubber. Or from ZIP or Corvette Central made to measure as a kit. I tried making but as I removed the existing seals they crumbled to dust.

Best of luck.

sirfixalot:
Click on small box next to person on the left of my post for DM

blackleroy44:
Vettech, I ordered bulk pack of Dynamat and Dynamat door kit today(hope it’s enough). My intentions are to start off with a rubberised undercoat, Dynamat and then a heat “deadner” such as Reflectix over the Dynamat. I intend to spray the wheel wells with the undercoat and any other place that might help with heat and noise. The firewall is a concern but I’ll sort that out, there’s not a lot of room. In yours and sirfixalot experience,will the Dynamat stick ok to the undercoat?

Navigation

[0] Message Index

[*] Previous page