Author Topic: transmission pan torque  (Read 3762 times)

0 Members and 1 Guest are viewing this topic.

Offline Adam

  • Four Barrel
  • ***
  • Posts: 203
    • http://homepages.ihug.com.au/~turon/photo/index.htm
transmission pan torque
« on: December 19, 2002, 10:23:56 PM »
I'm gonna change my TH350's fluid and filter tomoro. I was wondering whats the torque settings for the bolts around the pan when i go to put it back on. I have a new gasket.

Adam
1980 LG4 stock 305 running LPG.


I'm a highway staaaaaarrrr...

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
transmission pan torque
« Reply #1 on: December 20, 2002, 10:23:34 AM »
Off the top of my head I think it is around 12 - 15 lbs, torqued in 2 stages.

They don't take a lot.  Remember to nip them up after a few 100 k's.

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
transmission pan torque
« Reply #2 on: December 20, 2002, 11:21:49 AM »
Adam...Haynes manual says pan torque figures are from 90-130 # per Sq ".
Whatever that works out to in ft/lbs
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes