« previous next »
Pages: [1]   Go Down

Author Topic: Passenger exhaust manifold 71 454  (Read 7511 times)

0 Members and 2 Guests are viewing this topic.

Offline Old guy

  • Two Barrel
  • **
  • Posts: 26
  • Location: Wollongong NSW
  • Car: c3 1980 Vette
Passenger exhaust manifold 71 454
« on: July 06, 2021, 12:50:29 PM »
Hi, after one of these. Anyone got one?  LHD. Car has aircon too (if that helps). Then.....is it a bastard of a job to remove and instal? Cheers.
Logged

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 701
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
Re: Passenger exhaust manifold 71 454
« Reply #1 on: July 06, 2021, 07:53:01 PM »
Tie the compressor up to roof of garage to save degassing, unbolt from brackets. Everything else is straight forward take note of spacers for compressor brackets. Spray the studs on flange gasket with lubricant a couple of days before starting.
Logged

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Passenger exhaust manifold 71 454
« Reply #2 on: July 06, 2021, 09:16:07 PM »
Got a photo or casting number.
Bfit
Logged
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Old guy

  • Two Barrel
  • **
  • Posts: 26
  • Location: Wollongong NSW
  • Car: c3 1980 Vette
Re: Passenger exhaust manifold 71 454
« Reply #3 on: July 07, 2021, 10:14:54 AM »
Thanks sirfixalot.

Can barely get a photo of the issue let alone anything else. When I get it off the car I'll let you know Bfit.....cheers.
Logged

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Passenger exhaust manifold 71 454
« Reply #4 on: July 07, 2021, 03:27:27 PM »
Quote from: Bfit on July 06, 2021, 09:16:07 PM
Got a photo or casting number.
Bfit
I would have as set of a 70 model , they should be the same  ,   but you never know.
BFit
Logged
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Old guy

  • Two Barrel
  • **
  • Posts: 26
  • Location: Wollongong NSW
  • Car: c3 1980 Vette
Re: Passenger exhaust manifold 71 454
« Reply #5 on: July 07, 2021, 03:29:39 PM »
Yeah true. Not going to chance it. Have just ordered one via a Corvette shop. Should be here soon. Define soon....haha
Logged
Pages: [1]   Go Up
« previous next »