Author Topic: Know anyone who can re-program a stock '86 ECU?  (Read 3700 times)

0 Members and 1 Guest are viewing this topic.

Offline peterw

  • Two Barrel
  • **
  • Posts: 42
  • I'm new here
  • Location: Sydney South, NSW
  • Car: 1986 C4 Coupe Red
Know anyone who can re-program a stock '86 ECU?
« on: November 07, 2019, 09:02:24 PM »
I want to install a disable switch for the overdrive on the 4+3 Doug Nash in my '86.  Car is all factory stock and OD works as it was intended.

I would like to have a switch that disables all the silly factory functions and just be able to engage it when on the highway.

The guys on the US forum say that you can re-program the ECU to stop the factory silliness.

Does anyone know someone in Australia that could do this?

Peter

Offline MY081

  • I'm here. Woo Hoo! :)
  • Fuel Injected
  • *****
  • Posts: 860
  • Pleb
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #1 on: November 07, 2019, 10:06:13 PM »
Hi Peter this maybe what your looking for , check out Ecklers Corvette Cags Skip Plug Seal Part number 22712  $13 . Ray

Offline peterw

  • Two Barrel
  • **
  • Posts: 42
  • I'm new here
  • Location: Sydney South, NSW
  • Car: 1986 C4 Coupe Red
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #2 on: November 07, 2019, 10:48:47 PM »
Unfortunately that part number is for 89-95 with 6 speed.  It has been badly labelled by Ecklers.

I couldn't find one for the 4+3

I have no idea what CAGS is?

Would be nice if someone did a ready made fix for this.

Peter

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #3 on: November 08, 2019, 08:18:17 AM »
Computer Aided Gear Selection
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline peterw

  • Two Barrel
  • **
  • Posts: 42
  • I'm new here
  • Location: Sydney South, NSW
  • Car: 1986 C4 Coupe Red
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #4 on: November 08, 2019, 10:39:47 AM »
I guess that it the light on the dash that tells me when I need to change gear?

Does anyone use that?

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #5 on: November 08, 2019, 03:38:51 PM »
when you find someone, I received a call from a vette owner in SA looking for some help with the ECM in a 2005 C6.
bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline gtc

  • Supercharged
  • ******
  • Posts: 1464
  • Car: 1970 454 Manual
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #6 on: November 09, 2019, 03:14:33 AM »
Give Steve Rosenfels a call. He does ECU reprogramming on a range of engines for tuning purposes and he may be able to assist with yours.

https://www.srperformance.com.au/

It's C3 chromie for me, see? Si!

Offline Ausrs

  • Four Barrel
  • ***
  • Posts: 165
Re: Know anyone who can re-program a stock '86 ECU?
« Reply #7 on: November 09, 2019, 05:19:21 PM »
Many years ago I had a new prom made for me in the USA ,I found the guy on Thirdgen.org, when I last heard from him this brianlvs@yahoo.com was his email address,from memory it was $100 $us plus postage...My car is an 87 ..I had the later model tune installed,vats delete egr delete fans come on at a lower speed and auto reprogrammed to drop into od at 40 mph .