Technical Tips > Body Parts - Bodywork - Paint
Ecklers RH Side mirror
Matt G:
Hi guys, just a quick heads-up that the RH side mirror for a ‘70 from Ecklers has a bad casting and won’t mount down tight on your car. Their LH side fits fine, however the RH side base casting flange is about 2mm too short. I tried two of them and even tried rigging up a spacer, however no success. Steer clear if you don’t want to waste a bunch of time and money.
gtc:
Thanks for the heads-up.
Poor fitting parts is the bane of the Corvette aftermarket, unfortunately, and especially annoying when you add shipping.
MADLT1:
I did a post a long time ago on how to fix your original mirrors,a step by step,it should be still on here some were?very helpful and a lot cheaper
gtc:
--- Quote from: MADLT1 on December 14, 2018, 04:42:19 PM ---I did a post a long time ago on how to fix your original mirrors,a step by step,it should be still on here some were?very helpful and a lot cheaper
--- End quote ---
Here you go:
https://nswcorvettes.com.au/forum/index.php/topic,4745.msg1045921478.html#msg1045921478
MADLT1:
nice job that's the one
Navigation
[0] Message Index
[#] Next page
Go to full version