Hi Jim, what was the final problem found by SR Perf? My brakes went soft last week (no components changed) and they sound like exactly the same problem. I have speed bleeders, and my trusty Mityvac, however still same 1” off the floor. Did the pump and hold bleed which found a small hard line to braided flex line leak (FRS), tightened up and bled again for solid fluid, same 1” pedal again. Master cylinder is about 8 years old, but very low miles. I get a small spirt up through my front brake system when the pedal is pressed quickly. I assume that my front pot piston seal is worn, but before I go through the whole component change out test, re-test, re-test, etc, etc exercise of this 15 page (and many months exercise), I figured that I’d ask what the problem was before repairing or upgrading...
Thanks, Matt
