Technical Tips > Engines - Carbies - Exhausts - Dissys

ENGINE REMOVAL

(1/2) > >>

reserved:
Does anyone have an engine lifting bracket that bolts onto the inlet manifold, that I could borrow. I know they are only $50, but I would prefer to spend the $50 on parts as this is probably the one and only time in my life that I will remove an engine. An engine stand would also be helpful but not essential. If anyone can help, thanks.  :cheers:

sirfixalot:
You are  better with an adjustable lifting bar so that you can tilt engine & gearbox as it comes out where are you located?

reserved:
I am located in the Penrith area. I will be at the Nelson Bay weekend and at the next club meeting. As the car is automatic the gearbox will not be removed.
 :hi:

bfit:
i would think hard about getting the trans serviced while you have the engine out, unless you have info,to,say it’s been recently done.
It’s a pain to but the engine back in and find you have a leak.
Bfit

77CVT:
....and while it's out clean some bits, change the drive shaft uni's, etc, etc ..................and before you know it ............. it becomes a 3 month project!   :lol:

Navigation

[0] Message Index

[#] Next page