Author Topic: Fibreglass rear spring  (Read 6548 times)

0 Members and 2 Guests are viewing this topic.

Offline 72C3

  • Two Barrel
  • **
  • Posts: 46
Fibreglass rear spring
« on: June 14, 2017, 04:18:37 PM »
Has anyone bought a fibreglass rear spring from ecklers.  I am going to replace mine as I think it is the original and the rear is sitting a bit to low, ride is sloppy and I have to avoid every bump in the road.  It is a 72, 350 and relatively standard.  I am thinking that the 315 lb would suffice.  I will replace the rubbers and mounting hardware at the same time.  I think the shocks were replaced during its body off restoration in 2010.  Any comments would be appreciated before I commit.  I nominated ecklers due to discounts offered through the club.
Thanks
Stu

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Fibreglass rear spring
« Reply #1 on: June 14, 2017, 08:53:47 PM »
I'd go  330  from vansteel or VBP
If you are tinning wider rims you can get a shortened spring.
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill