Technical Tips > Electrical-Electronics-Air-Lighting-Guages-Security-Vacuum

DISTRIBUTOR SELECTION

<< < (2/3) > >>

bfit:
Being a BB I would be looking at an MSD distributed  to work with the 6AL
They do a unit with tachometer drive  that can be set up with 12 deg adavance .
 It will give you a good degree of confidence in the car
Bfit

reserved:
$700 for a distributor and $400 for a 6AL totals $1100, which is a big spend for me.   :thumbdown:

bfit:

--- Quote from: reserved on July 19, 2017, 08:18:17 PM ---$700 for a distributor and $400 for a 6AL totals $1100, which is a big spend for me.   :thumbdown:

--- End quote ---
I thought I read you were already using a 6AL controller

Vettech:
Is it the "MSD Digital 6AL" if so I thought the ummmm "grey wire" is the tacho output.
There is a pdf file that gives details of using 6al with ford, gm etc many diff types of engine/maker

bfit:
I think that's right  the grey wire from the controller is the pulse  wire .

It's most likely  possible  to use a HEI distributor, if you re wire it with a stand alone coil
And use the mag pickup to trigger the controller.

Navigation

[0] Message Index

[#] Next page

[*] Previous page