Author Topic: 85 Water Pump Backing Plate Gasket  (Read 9898 times)

0 Members and 1 Guest are viewing this topic.

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
85 Water Pump Backing Plate Gasket
« on: May 03, 2017, 06:55:03 PM »
Are we able to buy these separately?  For some reason coolant was leaking considerably from the back of the water pump near one of the bolts that holds the backing plate on.

Did a quick search and came up with nothing.

 :cheers:

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1595
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: 85 Water Pump Backing Plate Gasket
« Reply #1 on: May 03, 2017, 08:11:12 PM »
Try Ponti World or Chev Parts Yenora.
🖕 Vettech.

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 700
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
Re: 85 Water Pump Backing Plate Gasket
« Reply #2 on: May 03, 2017, 08:39:48 PM »
,.I have a pump here which I took off my 78 thought the bearing was  gone turned out to be the belt if it suits you can have it for $10 plus postage

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
Re: 85 Water Pump Backing Plate Gasket
« Reply #3 on: May 03, 2017, 09:36:20 PM »
Pump is fine, just the backing gasket that leaks. Just couldn't find a gasket for it and not sure one is available.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: 85 Water Pump Backing Plate Gasket
« Reply #4 on: May 03, 2017, 10:36:45 PM »
Make one
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline metalhead

  • Four Barrel
  • ***
  • Posts: 198
  • Black is best...
  • Location: Newcastle, NSW
Re: 85 Water Pump Backing Plate Gasket
« Reply #5 on: May 03, 2017, 11:35:29 PM »
Definitely available, I've got one in the garage somewhere. Can't remember if it came in a full engine gasket kit or a water pump gasket kit or what. Summit has them.

https://m.summitracing.com/search/make/chevrolet/engine-family/chevy-small-block-gen-i/engine-size/5-7l-350/department/gaskets-seals/section/engine-gaskets-seals/part-type/water-pump-gaskets

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
Re: 85 Water Pump Backing Plate Gasket
« Reply #6 on: May 11, 2017, 04:42:26 PM »
Turns out after a bit of cleaning it's the backing plate.   :therethere:

Are all backing plates the same?  https://m.summitracing.com/parts/ssh-wpp001

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1595
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: 85 Water Pump Backing Plate Gasket
« Reply #7 on: May 11, 2017, 09:32:56 PM »
Ummm now thats different, have a 78, water pump leaked at rear, car had stood before I purchased it only filled 1/2 up with coolant.
Could not get a new pump or backing plate (20years ago). There was a line of corrosion right across and thru the plate.
In the end - I cleaned back to base metal, then silver soldered or brazed the holes up.
Then coated the whole plate with Red Stag, cut a new casket from bulk sheet.
Fitted it up - still ok after ~ 20 years.
🖕 Vettech.

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
Re: 85 Water Pump Backing Plate Gasket
« Reply #8 on: May 12, 2017, 09:57:31 AM »
If only I could solder!   :banghead:

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: 85 Water Pump Backing Plate Gasket
« Reply #9 on: May 12, 2017, 03:47:43 PM »
never to later to learn new skills
bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1595
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: 85 Water Pump Backing Plate Gasket
« Reply #10 on: May 12, 2017, 07:32:28 PM »
No Bob he dosent need to re-skill, I've reread this thread and all he needs is a sheet of gasket paper, blades, knives, sissors, hole punch, hammer.
Get pump off, get back off, use as template, cut new gasket and Bobs your uncle but dick will always be your best friend.
🖕 Vettech.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: 85 Water Pump Backing Plate Gasket
« Reply #11 on: May 12, 2017, 08:04:51 PM »
No Bob he dosent need to re-skill, I've reread this thread and all he needs is a sheet of gasket paper, blades, knives, sissors, hole punch, hammer.
Get pump off, get back off, use as template, cut new gasket and Bobs your uncle but dick will always be your best friend.
Read down the page , I said make a gasket
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
Re: 85 Water Pump Backing Plate Gasket
« Reply #12 on: May 15, 2017, 10:39:41 AM »
I'll give it a crack!   :noel:

I'm keen to drive it after a loooooong time not getting the time to.  Worst case it only lasts a while and I have to pull it off again.   :thud:

 :cheers:

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: 85 Water Pump Backing Plate Gasket
« Reply #13 on: May 15, 2017, 10:56:56 AM »
I'll give it a crack!   :noel:

I'm keen to drive it after a loooooong time not getting the time to.  Worst case it only lasts a while and I have to pull it off again.   :thud:

 :cheers:
the thing with water pump gaskets is you need to keep the impeller to cover clearance as standard  to get the correct flow
measure the original material if you can, and duplicate it .
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill