General Discussion Area > Corvette Related Chat

Engine continually cuts out - 75 C3 350

<< < (9/11) > >>

jimandemma:
Oily carb adjustment screw LHS

sirfixalot:
The relay in  question is high speed fan relay for ac. Dissy should have a pink wire which has 12v in run & start position  & also white wire which is output from dissy to tacho. These should be two individual plugs into dissy for these wires.  There should be no wire going to relay from dissy. Remove the pink wire & run a wire with spade connector from dissy  terminal to battery + on alternator then try to start engine

jimandemma:
yeah, was wrong on relay. Will try the wire to alternator in the morning.

jimandemma:
All fixed. Ended up being the module in the distributor. Thanks guys.

Jim

sirfixalot:
I hope you bought a half decent one I put a chinese one in my 79 gave up on me going down the coast, was doing 100k on freeway then nothing. Did you use heat sink paste under module?

Navigation

[0] Message Index

[#] Next page

[*] Previous page