General Discussion Area > Corvette Related Chat
Right to Left Conversion #2
70vette:
[imghttp://[/img]
Hi kids!!😀. Hope we all had a great Christmas and a happy New Year :drunk:
Got off my backside tonight and decided to bolt in the new pedal box and the Hydratec booster and master cylinder. Still have to bleed it (that will be fun) :rol:
70vette:
[/u :grr: :grr: :omg:rl] :banghead: This is supposed to be therapeutic!!! Trying to save the dash harness. Im close to packing it in an buying a new one :thud: :thud: :thud: :tears: :tears:
sirfixalot:
Easy just remove individual wires from the plugs & untangle a large board on top of a couple of garbage bins measure out what is required then put nails in board then lay loom up on board.Solder joints,Use heat shrink & stagger all your joints. If you can get an old loom out of a Hq - Hj holden you can utilise some of wires & crimp ends some plugs are the same, colour code is pretty much the same. I used a premier loom for headlights on my 78. Just untapped & relayed it up how I wanted it
70vette:
--- Quote from: sirfixalot on March 31, 2018, 09:29:04 AM ---Easy just remove individual wires from the plugs & untangle a large board on top of a couple of garbage bins measure out what is required then put nails in board then lay loom up on board.Solder joints,Use heat shrink & stagger all your joints. If you can get an old loom out of a Hq - Hj holden you can utilise some of wires & crimp ends some plugs are the same, colour code is pretty much the same. I used a premier loom for headlights on my 78. Just untapped & relayed it up how I wanted it
--- End quote ---
Jeez...talk about getting caught up in my own world. Didn't even think about HQ/WB wiring looms as spare parts :lol:
I was just frustrated with shortening the loom (Back to original lengths from the extended version from RHD conversion) and having to solder so many different wires. I am short some plugs and yes as you say, "the HQ/WB would be very similar"....thank you for the tip :thumb:
sirfixalot:
If you get stuck I have lots of plugs & an old loom from an 80 model
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version