Technical Tips > Pre 84

Cost of replacing all bushes on a 75 Corvette

(1/4) > >>

Speedvette:
Would anyone have any idea how much it would cost to replace all the bushes on a 75 Corvette?

sirfixalot:
How long is a piece of string ?, do you want to do some of the work yourself, drive in drive out , polyurethane  or rubber, have they ever been done before or have they been there since 1975, 40 years of rust to lock every thing solid.

metalhead:
Doing it yourself, a few hundred bucks and a lot of work. No idea what it would cost in labour. I used this kit, if you want poly bushes: http://m.summitracing.com/parts/ens-3-18123g Contained every bush except the front sway bar to chassis bushes (the front swaybar link bushes were included).

Scott:
If you are doing all the bushes, you should do all the ball joints and tie-rods while you have everything apart. And replace the shocks.  And replace the springs. And... the list goes on  :bouncesmile:

VBandP.com have everything you'll need.

metalhead:

--- Quote from: Scott on February 18, 2016, 08:44:52 AM ---If you are doing all the bushes, you should do all the ball joints and tie-rods while you have everything apart. And replace the shocks.  And replace the springs. And... the list goes on  :bouncesmile:

VBandP.com have everything you'll need.

--- End quote ---


Agreed, certainly at the least replace the balljoints, tie rods, idler arm and shocks unless they've been done recently.

Navigation

[0] Message Index

[#] Next page