Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres

How low is too low?

<< < (3/3)

69CVET:
Hey Roscoe ... just checked some info also on Australian Corvettes Forum seems quite a few guys have put the Peddars in ( only $98 each )
I guess its a bolt them up and see how they ... A bit of trial and error.

Yes also have a new set from Vansteel ( Bfit gave me the contacts and Dan was very helpful with the Fibre Spring and Adj Struts , New Half shafts etc.. )

bfit:
get the one inch a side shorter spring and you will have no problems
VB&P  and vansteel sell them.
I think they are the same spring from either supplier
Bfit

MY081:
HI 69CVET King springs make a coil spring for c3s . They were made specially for Ron Missen Motor Sport if you ask them about them they should know what your talking about . From memory they are about an inch lower than standard . Ron did a lot of work getting them right and to his specifications . Ray

69CVET:

Thanks Ray, will check them out also

Chris

Navigation

[0] Message Index

[*] Previous page