Technical Tips > Pre 84

lowering kit

<< < (2/3) > >>

73 CORV:
Thanks guys, need to drop it another  1" at least, at the moment I have 8" bolts.

bfit:
Have you got castellated nuts  on the bolts at the moment
What the measurement from ground to chassis just in front of the rear wheels
Bfit

73 CORV:
150 off the ground I have nylon nuts

bfit:
The nuts must be close To being as far down the bolt as possible,
The standard measurement would be 7 and 5/8"  ( about 194 mm ) to 8" ( 200mm)
Which means the car is already lowered around 1.5"
Bfit

Check these pages.
http://tech.corvettecentral.com/2011/04/c2-c3-corvette-ride-height-guide/

This shows where to measure chassis

http://www.c3vr.com/member_pages/4401_4500/4427/specs.jpg

73 CORV:
The nuts are all the way down as far as they can possibly go. I'm trying to load a photo of the car but haven't been able to.

Navigation

[0] Message Index

[#] Next page

[*] Previous page