Author Topic: Rear end noise/clunk  (Read 10510 times)

0 Members and 3 Guests are viewing this topic.

Offline Benandsally

  • Two Barrel
  • **
  • Posts: 48
Rear end noise/clunk
« on: September 09, 2014, 09:04:42 AM »
Hi Guys,
I seem to have got a rear end noise in my 71' Vet mainly when i reverse and turn is when its at its worse.Had a look underneath and all looks ok nothing rattles when i try to move things like universals rubbers.
Any advise or recommendation were i could take this to would be greatly apreciated.I live near Liverpool.
 :tears:

Offline MY081

  • I'm here. Woo Hoo! :)
  • Fuel Injected
  • *****
  • Posts: 862
  • Pleb
Re: Rear end noise/clunk
« Reply #1 on: September 09, 2014, 09:37:42 AM »
Hi Benand sally you could try Ron Missen ( one of our sponsors )at Ingleburn I recomend him Ray

Offline Benandsally

  • Two Barrel
  • **
  • Posts: 48
Re: Rear end noise/clunk
« Reply #2 on: September 09, 2014, 10:02:18 AM »
Hi My081
Thanks for that very much appreciated as i am near Ingleburn.
I just looked for Ron Misseen's number and could not locate it.
Could you send it if you are aware of it please.
regards
BenandSally
Happy Days

Offline Benandsally

  • Two Barrel
  • **
  • Posts: 48
Re: Rear end noise/clunk
« Reply #3 on: September 09, 2014, 10:23:02 AM »
Hi My081,
Thanks for all. I just got on to Ron and all is good much apreciated
Have a great day
BenandSally

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1617
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: Rear end noise/clunk
« Reply #4 on: September 09, 2014, 08:43:11 PM »
That does not sound good. Could be the diff, if the CV / uni's are OK. Please keep us informed - thanks.
🖕 Vettech.

Offline sabre

  • Tri Powered
  • ****
  • Posts: 294
  • C4 Rocks but Excalibur Cruises
  • Location: Glossodia
  • Mood: How good is retirement!
Re: Rear end noise/clunk
« Reply #5 on: September 10, 2014, 10:48:35 AM »
Had the same symptoms in my '88 recently. "Clunk" noise on changing directions and when going over dips or cornering. Outer unis were the problem. Couldn't feel any movement while on the car but trunions badly marked. If you find the same, I suggest doing all 4 as the inners were dry and on their way out.
Replacement unis have grease nipples (not so on originals). Have the unis fitted so that the nipples all face the inner (diff centre) otherwise you can't get a grease gun on them.