General Discussion Area > Corvette Related Chat

Here We Go Again

<< < (3/4) > >>

Reklaw:
Thanks for the info on the dash globes Vettech. Last week I was reading Battee's info about all things electrical on a C4 and ordered a set of their Xenon globes, which are winging their way to Oz at the moment. Good to know that others are available locally 'though.

Not sure about that tow bar idea Dave. Might leave that job to the GTS Triton. Unless of course you mean that the tow bar would be a good place to attach a winch cable if the bloody thing breaks down in the middle of whoop whoop.

Reklaw:
Working on something that someone else has been stuffing about with is always a "voyage of discovery".

So far, on this '87, I've come across wires just twisted together,  green/white wire entering a home made bit of harness and exiting as a blue wire, a knock in the top end that was caused by the Yella Terra Roller Rockers (which the previous owner didn't know it had) hitting on the nice shiney new chrome rocker covers which, by the way, don't include an oil filler opening. Guess I'll have to use the PCV opening to do an oil change. Fixed the rocker hitting the rocker cover problem with one of these things.  :lol:
The most interesting was tracking down an oil leak at the front of the engine. First thoughts were front oil seal, so started ripping everything off the front of the engine. While removing the bolts that secure the P/S and Alternator bracket to one of heads, I noticed that the bolt was very oily. But that's a blind hole in the front of the head. Turns out someone had used a bolt that was just a bit too long and it had fractured the head casting right where that big drain hole is in the head, the one that lets the oil drain back to the sump. A bit of a cleanup and bit of Silastic and oil leak gone, I hope.

Vettech:
Wires - I luv wires esp the ones you mention, except several of mine changed colour twice within the loom, I won't mention that company up Nth that did the conversion. Also ones in the engine bay cut off and left hanging, why would you need two horns ? Unless one sounds like a choking chook. Surely they could have pulled the plug off or better still fit another horn!? Ahhhhhhhh!!!!!!!!. Calm down - remember the blood pressure...........".".". Oh now get a small tube of "Red Stag" jointing compound used sparingly on jobs like that bolt, it can also be used on food/ beverage equip. The water pump backing plate on my 78 was corroded out and my Silver soldering leaves a lot to desire (could not get another something about the nose length) any way after the solder came a coat of Stagg - still water tight.

gtc:
Recklaw, as the Americans would say "Bubba" has been working on that car.

Have heard of conversion jobs where shoddy rewiring caused all sorts of problems down the track with computerised ignitions, etc.

Reklaw:
I think Bubba has migrated to Down Under!

Navigation

[0] Message Index

[#] Next page

[*] Previous page