Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres

Rear Wheel bearing

<< < (2/2)

bfit:

--- Quote from: Scott on March 30, 2015, 09:29:22 AM ---As said, it's easiest to take the whole trailing arm off, so you may as well do all the bushes and handbrake while it's out.  It may take some effort to press out the old stub axle.  My cheap 20ton press wouldn't do it and I had to take it to a diff shop.

--- End quote ---
the first time i did a set of bearings in the railing arms i made  up pressing gear etc
  ever set since I have tapped the stuns out with a 4 lb dead blow hammer
 I agree take the training arms out.
do the compete job once.
Bfit

Navigation

[0] Message Index

[*] Previous page