Technical Tips > Pre 84
Amber flasher lens for Aussie registration.
Scott:
--- Quote from: reserved on February 08, 2015, 10:49:49 PM ---If the inspector knows the compliance requirements, he will require that the turn blinkers are amber as required by ADR 6 if the vehicle was manufactured after January 1973. :bolt::nag: :nag:
--- End quote ---
^^This. It's written in the NCOP guidelines.
I put amber bulbs into the reverse light socket and fitted a new white led strip above the number plate for a reverse light. You will need to run a new wire along the existing wire harness from your brake pedal switch to the brake lights as the current system uses the indicator wires for the brake light as well.
StephenSLR:
There is another solution.
You can get bi-colour LED bulbs.
Here is a demo how they work on the front parking lights on a Mustang.
Of course they need the clear/white blinker lenses as you do have for Corvette back up lights.
http://www.ebay.com.au/itm/291371205202?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
You will then need to wire the blinkers to the back up bulbs; they are programmed so when you hit the blinkers they glow orange and when you hit park (and I assume they'll do the same with reverse) they glow white.
s
sirfixalot:
I do a step by step work sheet how to modify wiring to suit I usually throw one in the box with seatbelts.
It is definitely a requirement for an 80 model as it is affected by ADR's. I heard just recently that an instruction from RMS was recently issued to blue slip stations that the indicators had to be separated from the brake lites for all US cars regardless of year model haven't seen it in writing.
It is in your best interest to alter them as it is quite confusing seeing brake lite /blinkers/tailites all alternating on & off. Try standing behind the car & put on parkers in sunlite then get some one to operate brake lites with blinker on
Jethro:
--- Quote from: 69 DIRTY RAT on February 08, 2015, 10:03:45 PM ---It isnt compulsory! dont let anyone tell u it is! My Vette, Caddy and Suburban are all red lens red blinker!
--- End quote ---
Ditto for me
Scott:
--- Quote from: Jethro on February 13, 2015, 07:53:09 AM ---Ditto for me
--- End quote ---
You car isn't post 73 though (based on the chrome front bumper) :)
It's not hard to do, you just need to run a new wire from the brake pedal to the brake lights, then connect the correct wire to the correct bulb to suit your plan of attack. I moved the indicators to the clear lenses and used amber bulbs. I then installed a white LED strip light above the numberplate for reverse lights.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version