Technical Tips > Pre 84
My lights on the C3 just stopped working now won't raise ??????
sabre:
Fuses not used in any part of the light lift mechanism. It's all mechanical and vacuum.
Stupid question but you do have the engine running don't you?
69CVET:
Yes mate Engine was running heading to the man cave now to go over it.
sabre:
--- Quote from: ChopTop_73 on December 06, 2014, 05:30:08 PM ---Yes mate Engine was running heading to the man cave now to go over it.
--- End quote ---
Check small hose on the vac relay (front of hood) for vac with bypass on. Should be able to feel/hear it with hose off. If OK all dash control is good.
Relay acts like a tap. big hose from inlet should have vac while ever engine is running. Oulet to vac motor has vac only when small line has vac on it.
Very common for one or both relays to leak enough to stop operation. If so work out which leaks least and using a couple of "Ts" operate both motors from the best relay.
Good luck!
69CVET:
Passenger side limit switch or spring loaded switch has broken off. Is this a switch to interlock that light is on position. It's completely broken away. Drivers side is intact. Will now go through your procedure. Thanks heaps
sirfixalot:
The switch is there to operate indicator lite on dash only has no bearing on operation of mechanism. Working on a conversion kit to make the headlites electric if anyone is interested?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version